Rihac IP4200 Instruction Manual download pdf (Page 22)

11) Final touches (all models)

a) Place the CISS unit on the left hand side of your printer and Insert all the air

filters into the top of each air balance chamber. The larger end should be

inserted into the air balance chamber.

b) Release the tube clamp on the front of the CISS by rolling it up.

c) Reinsert power cable to the rear of your printer. Perform a head clean and

nozzle check as per steps 1)a) & 1)b). Please note that this may need to be

performed several times to ensure excess air is removed.

CAUTION - NEVER HAVE THE INK RESERVOIRS HIGHER OR LOWER

THAN THE PRINTER HEIGHT. THIS WILL EFFECT THE INK FLOW TO

YOUR PRINTER, AND CAUSE YOUR PRINTER TO FLOOD WITH INK

Release the tube

clamp by rolling

the roller up.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

No comments

Rihac IP4200 Instruction Manual Page 22